Spool of 2.85mm LW-PLA filament
With ColorFabb LW-PLA, it is possible to print objet twice lighter than a regular PLA. The material starts to foam at 230°C. Then, flow rate can be reduced up to 60%.
Warning : to get benefit from this filament specificities, it is mandatory to master its printer setup.
- Filament diameter: 2.85mm +/- 0,1mm
- Raw material: LW-PLA
- Printing temperature: 195 - 260°C
- Coil size: diameter 200mm, hub 53mm, width 57mm
- Material weight: 750g minimum
- Color: Natural
Made in the Nederland
Photos are not contractual.